欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 新闻资讯

    老高温老化房价格是多少呢?该怎么进行保养呢

    2019-03-02 20:35:42 无锡盛发地坪科技有限公司 阅读

    其实简单来说高温老化房就是针对能电子产品仿真出一种高温、恶劣环境测试的设备,而且也还被称为老化房和烧机房。如今也是广泛的运用在很多领域,那么高温老化房价格是怎么样,还有该怎么进行保养呢,下面小编帮大家总结一下相关的知识。高温老化房属于非标定制设备,所以价格高于常规高温试验箱,具体是根据用户的样品试验需求的温度范围与尺寸大小等因素来定价的,一般在几十万到上百万不等。由于属于大型试验设备,对温度范围的控制与钣金工艺难度也就越大,所以高温老化房价格相对来说是比较高的。除了价格因素外采购高温老化房要关注的是设备的性能与使用寿命,毕竟大家都不希望花大价钱买回去的设备在使用了一段时间后出现故障,不然就要花额外的钱去维修设备,还需要浪费大量时间才能进行下次试验,这样就给企业带来非常大的损失。

    In fact, simply speaking, the high temperature aging room is to simulate a high temperature, harsh environment testing equipment for energy and electronic products, but also known as the aging room and burning machine room. Now it is also widely used in many areas, so how about the price of high-temperature aging house, and how to maintain it, the following small edition to help you sum up the relevant knowledge. High-temperature aging room belongs to non-standard customized equipment, so the price is higher than that of conventional high-temperature test box. Specifically, it is priced according to the temperature range and size of the user's sample test requirements, generally ranging from hundreds of thousands to millions. Because it belongs to large-scale test equipment, the more difficult it is to control the temperature range and sheet metal technology, so the price of high temperature aging house is relatively high. In addition to price factors, the purchase of high-temperature aging room should pay attention to the performance and service life of equipment. After all, everyone does not want to spend a lot of money to buy back equipment after a period of time in use, or it will cost extra money to repair equipment, but also need to waste a lot of time to carry out the next test, which will bring great losses to enterprises. 1、使用前检查电压是否正确,请使用机台上所标示之电压,避免电过量,而发生火灾。

    1. Check whether the voltage is correct before use. Please use the voltage marked on the machine to avoid excessive electricity and fire.

    2、马达运行方向是否正常,若出风口有气体排出则为正常。(只适用于三相电压380V的机型)。

    2. Whether the motor runs in a normal direction or not, if there is gas discharging from the outlet, it will be normal. (Applicable only to three-phase voltage 380V model).

    3、当显示温度与实际温度(由标准温度计测出)差异甚大时,不可随意调整线路板之零件及内部参数,应通知本公司派工作人员前往处理。

    3. When the displaying temperature is very different from the actual temperature (measured by standard thermometer), the parts and internal parameters of the circuit board can not be adjusted at will. The company should be notified to send staff to deal with them.

    4、使用过程中温度变化时,请勿随意打开机门。

    4. Do not open the door at will when the temperature changes during use.

    5、请勿将机台放置于潮湿之场所或直接用水冲洗,以防漏电。

    5. Do not place the machine in a damp place or wash it directly with water to prevent leakage of electricity.

    6、禁止置酒精等,具有可燃性、挥发性之物品于机台内,防止意外发生。

    6. Alcohol is forbidden. Flammable and volatile items are kept in the machine to prevent accidents.

    7、在机台附近使用可燃性物品,应适当远离,防止意外发生。

    7. When using flammable goods near the machine, they should be properly away from them to prevent accidents.

    8、请小心将物品放入机台,温度在60度以上的请务必戴高温手套。

    8. Please put the goods carefully into the machine. If the temperature is above 60 degrees, please wear high temperature gloves.

    9、定时器(温到计时)有工作时,此时温控表上灯亮起,表示温度已达设定范围,机器开始持温。10、持温时,当显示温度与设定温度有过冲或偏低现象,需进行自动演算。

    9. When the timer (temperature to timing) is working, the light on the temperature control meter lights up, indicating that the temperature has reached the set range, and the machine starts to hold the temperature. 10. When holding the temperature, when the display temperature and the set temperature have overshoot or low phenomenon, it needs to be calculated automatically.

    10、机台内的加热器要定期进行检查,清除粉尘及其它杂残留物。

    10. Heaters in the machine should be inspected regularly to remove dust and other debris.

    11、定期检查老化房顶上的电线有没有被老鼠破坏或是线材老化现象

    11. Check regularly whether the wires on the ageing roof are damaged by rats or the wires are ageing.

    12、定期检查控制柜里的电器是否有灰尘,要保持控制柜里电器无尘,预防打火。

    12. Check the electrical appliances in the control cabinet regularly for dust. Keep the electrical appliances in the control cabinet clean and prevent fire.

    13、易燃、爆炸、易挥发性物质试样的试验及储存、腐蚀性物质试样的试验及储存、生物试样的试验或储存、强电磁发射源试样的试验及储存要注意。

    13. Attention should be paid to the test and storage of flammable, explosive and volatile substances, corrosive substances, biological specimens, strong electromagnetic emission source specimens.

    辛苦整理!转载请注明来自 http://www.chinasavant.cn/show.asp?id=158



    标签:   老化房 环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】