欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    厂家揭示旧环氧地坪如何翻新处理

    2019-03-01 12:11:34 无锡盛发地坪科技有限公司 阅读

    怎样对旧环氧地坪实行创新办理?旧环氧地坪创新办理需求针对客户地面的现实境况给出有用的计划,,较初咱们要相识环氧地坪老化的境况与将要干吗的地坪漆可否相容,假如地坪相容性好,只需求洗涤口头再实行地坪涂装便可,假如相容很差,则需求将旧地坪清除再沉?装.当旧环氧地坪老化水准对比严沉?,应实时干吗创新办理,所以,咱们都条件先到现场实行详明勘测,去现场相识地面境况,地面是混凝土、水磨石、瓷砖仍是旧环氧地坪可否有涂膜弊病,可否有油污等征象,假如有损害,损害的水准.根据地面的毁坏水准,与客户的条件,提出解决计划.

    How to carry out innovative management on the old floor? The need for innovative management of the old floor gives a useful plan for the actual situation of the customer's ground. At first, we need to know whether the aging situation of the epoxy floor is compatible with the floor paint to be done. If the floor is compatible, we only need to wash the floor orally and then apply the floor painting. If the compatibility is poor, then we need to clear the old floor and then install it again. Oxygen floor ageing level is relatively serious?, should be innovative in real time, so we are all conditioned to go to the site to carry out detailed survey, to know the ground situation, whether the ground is concrete, terrazzo, ceramic tile is still the old epoxy floor coating defects, whether there are signs such as oil pollution, if there is damage, damage level. According to the level of ground damage, and customer conditions, put forward solutions.

    对旧地坪实行创新咱们通常从下面几个方面着手:较初,实行旧地坪办理.咱们要应用专注的环氧地坪漆消耗设置先将旧地坪统共清除清洁.当存在有其他差别类别的环氧地坪实行施工时,咱们强制根据实习境况休止施工;次要,旧地坪的裂缝办理.当旧地坪有裂缝时,要先对裂缝休止办理,通常采取切割机将基底的裂缝切割出V形槽,继而再将V形槽里的杂物清除清洁,将公用修理环氧泥浆材料灌注,使其与基底来到平坦;其三,旧地坪漆残破办理.

    To innovate the old floor, we usually start from the following aspects: at the beginning, we should implement the old floor management. We should apply the dedicated epoxy floor paint consumption settings to clean the old floor. When there are other different types of epoxy floor construction, we force the construction to stop according to the practice situation; Secondly, cracks in the old floor should be dealt with. When there are cracks in the old floor, we should first clean the old floor. When the cracks are stopped, the cutting machine is usually used to cut the cracks in the base into V-grooves, and then clean up the debris in the V-grooves, pour the epoxy mud material for common repair into the base to make it flat. Third, the old floor paint is broken. 地面的残破处会严沉?感化环氧地坪漆找平,就我专注的环氧地坪漆提议先用打磨机实行打磨办理,再将须干吗环氧地坪漆得空鼓的地点敲遗失或革除,应用高强度的水泥或是泥浆对坑洞休止修理解决;末了,旧地坪存在污垢的办理.当觉察旧地坪漆地面存在油污时,较初要将油渍清除清洁.提议根据实习境况接续休止2~5遍的脱脂、脱油.守候外形清洁后,再休止环氧地坪漆施工.我领有十余年的环氧地坪漆施工经验,以专注的施工队伍,以优良的服务,靠得住的信用,优良的品行取得客户的歌颂.憧憬与您精诚合作,共创璀璨!

    Ground debris will be serious? Sensitized epoxy floor paint leveling, in my focus on the epoxy floor paint proposed that first use a grinder to grind the treatment, and then why epoxy floor paint empty place to knock out or remove, the use of high-strength cement or mud to repair pits and solve the problem of resting; Finally, the old floor there is dirt management. When the presence of oil on the old floor paint, it is more important at the beginning. It is proposed that the degreasing and degreasing should be continued for 2-5 times according to the practice situation. After waiting for the appearance to be cleaned, the epoxy floor paint construction should be stopped. I have more than ten years of experience in the construction of epoxy floor paint. With dedicated construction team, we can win praise from customers with excellent service, reliable credit and good conduct. We look forward to cooperating with you sincerely to create a bright future.


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】