Correct application methods of floor paint, such as forklift truck and cart wheels with elastic rubber wheels, without scraping hard objects on the ground, in the production process, adding hardener, using good curing agent or increasing solid content of color paint can effectively increase the service life and wear resistance of products. Unique views on formulation can also solve this problem from the aspect of formulation system. The service life is closely related to the cleaning and maintenance of epoxy flooring. Especially for parking lots, there are many cars entering and leaving every day, and car tyres enter parking lots and lanes with sediment on the road outside, which makes the lanes very vulnerable to pollution and damage. Therefore, the above areas should be thoroughly cleaned every day. 优点:整体无缝,颜色纯正饱和,可任意选择几种颜色搭配。表面光洁、极易清洁,防水防霉,抗渗,耐磨。
Advantages: the whole seamless, pure color saturation, can choose several color matching. The surface is smooth, easy to clean, waterproof and mildew-proof, impermeable and wear-resistant.
Construction Scheme of Garage Floor Paint
1. The parking area can adopt flat-coated epoxy floor for flat ground, while the ground with poor smoothness and surface strength can adopt epoxy mortar floor or epoxy resin self-leveling floor, and the color can be designed to be grey or green.
2. Because of frequent traffic, the design of vehicle lane should be strengthened relative to parking area. Epoxy mortar floor or epoxy resin self-leveling floor can be used. The color is usually green or grey. The width of vehicle lane should be set according to the site conditions. Usually, the two-way lane should not be less than 6 meters, the one-way lane should not be less than 3 meters, the pedestrian lane should be 1.5-2 meters, and the Yellow marking line should be drawn on both sides of the lane with a width of 8-12 mm. 。
3. Yellow or white paint arrows can be used to mark the direction and point to parking areas, such as A parking area, B parking area and C parking area.
4. Parking spaces should be set up according to the structure of the parking ground area. Cars can usually be designed to be 2.5-3.0 meters X5-6 meters. The parking spaces should be marked with yellow or white markings with a width of 8-12 mm.
5. In order to increase the visibility of the parking lot column and avoid encountering the column due to reversing, yellow and white twill zebra lines can be used to mark the lower end of the column below 1.0-1.2 meters.
标签:   地坪 环氧地坪漆 环氧地坪施工 环氧地坪