How can the basement floor paint be constructed to be dust-proof and beautiful? After the basement floor paint is constructed, it can be dust-free and beautiful. At the same time, the convenience of maintenance can also reduce the workload of cleaners, which can reduce some human resources. But a lot of owners directly construct epoxy floor paint, there are peeling, shelling and other phenomena. For this reason, we give the following two suggestions for the owner's reference: 1、地下室地面见不到水汽，水泥地面下面防水做的很好，同时水泥地面的强度硬度达到了环氧地坪漆施工的要求，那么就可以施工一个环氧薄涂地坪漆。环氧薄涂地坪漆价格便宜，施工简单，工期短，施工完成24小时后就能投入使用。以下是环氧薄涂地坪漆施工：
1. There is no water vapor on the basement floor. The waterproofing under the cement floor is very good. At the same time, the strength and hardness of the cement floor meet the requirements of the epoxy floor paint construction. Then an epoxy thin-coated floor paint can be constructed. Epoxy thin-coated floor paint is cheap, easy to construct, short construction period, and can be put into use 24 hours after completion of construction. The following is the construction of epoxy thin-coated floor paint:
A. Ground polishing and flooring, so that the bond between epoxy primer and cement floor can be strengthened. It is not easy for epoxy floor paint coating to peel and shell. Many of the peeling and peeling of epoxy floor paint is caused by the insufficient bond between primer and cement floor.
B. Roll-brush special epoxy primer of Mingcheng Brand. According to different cement floors, the primer made by Mingcheng Floor Paint Company is used for construction, and the bonding force is good. Component A and component B are poured into the batching barrel according to a certain weight ratio and stirred evenly with a stirring gun. Note: It must be proportioned according to the weight ratio, and must be stirred evenly at the same time. Many times, customers do not follow these two ingredients, resulting in non-drying paint.
C. After the Mingcheng epoxy primer is dried, the Mingcheng epoxy primer is mixed evenly according to a certain weight ratio, and scraped evenly on the ground with a scraper. D. After the epoxy coating is dried, polish and dust removal, then mix the Mingcheng epoxy topcoat evenly according to a certain weight ratio, and roll the topcoat onto the ground with a drum. Note: This should be based on the site of the construction workers to ingredients, to prevent the construction workers can not roll over and cause material burning.
2. If there is water vapor upwelling in the basement, then the epoxy floor paint can not be constructed, and the concrete sealant curing agent floor must be used for construction. Concrete sealant and curing agent floor can improve the compressive strength of concrete floor; shrink the capillary of concrete, effectively inhibit the entry of external pollutants into concrete; resist the erosion of chloride and other chemical substances; react with the substances in the base concrete to form a colloid in the pore; seal concrete, enhance its density; have higher impermeability and resist grease. Performance; After treatment, the ground will appear marble-like luster, the longer the use of the better finish.
3. Basement cement floors are sanded and powdered with slight water vapor. Epoxy mortar can be used to roll-coat the floors. Epoxy mortar floor has good wear resistance: special minerals are used as fillers, durable and wear-resistant, especially strong. Decorative performance and good.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工