欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪漆该如何正确的使用?

    2019-02-19 08:34:12 无锡盛发地坪科技有限公司 阅读

    随着社会的发展,生活中已经慢慢出现改革。环氧地坪漆也悄悄登上了装修的舞台,如何选择环氧地坪漆呢。耐磨性,环氧地坪漆上面多数是行车,踩人,所以耐磨性必须要好。基面情况,一般抗压强度的数值大于20就行了。颜色上的选择。针对不同的颜色设计,有很多颜色供设计要求的,同时还有亮光,亚光之分。

    With the development of society, there has been a gradual reform in life. Floor paint is also quietly on the stage of decoration, how to choose epoxy floor paint? Abrasion resistance, epoxy floor paint is mostly on the car, trampling, so wear resistance must be good. In the case of base plane, the value of compressive strength is usually greater than 20. Choice of color. For different color designs, there are many colors for the design requirements, and there are also bright, sub-light.

    适用范围

    Scope of application

    适用于一般轻型工业地面、货仓及步行地面,用途广泛,可使用在医药、烟草、饲料、家具、服装、升降机大堂,楼宇走廊、储物室、球场、体育馆、电子、印刷、饮食等行业使用。

    It is suitable for general light industrial ground, warehouse and walking ground. It is widely used in medicine, tobacco, feed, furniture, clothing, elevator lobby, building corridor, storage room, stadium, gymnasium, electronics, printing, catering and other industries. 产品特点

    Product characteristics

    1、防尘、防腐、防潮、耐磨;

    1. Dust-proof, anti-corrosion, moisture-proof and wear-resistant;

    2、便于清洁、施工快捷、维护方便、造价低廉;

    2. Easy to clean, quick to construct, easy to maintain and low cost;

    3、附着力强、柔韧性好、耐冲击;

    3. Strong adhesion, good flexibility and impact resistance.


    施工参数

    Construction parameters

    1、打磨清洁地面;

    1. Grinding and cleaning the ground;

    2、用甲组份涂刷封闭底漆,增加附着力;

    2. Blocking primer with component A to increase adhesion;

    3、按重量比甲:乙=1:1混合搅拌均匀,加入适量滑石粉,石英砂刮填地面一至两次达到平整要求;

    3. Mix and mix evenly according to weight ratio A: B = 1:1, add proper amount of talc powder, and scrape quartz sand to fill the ground once or twice to meet the requirements of leveling.

    4、涂刷封闭中间漆。按重量比甲:乙=1:1配漆,涂刷一遍;

    4. Brush and seal the intermediate paint. Paint according to weight ratio A: B = 1:1 and brush once.

    5、充分搅匀乙组份色漆,按重量比甲:乙=1:1配漆,涂刷两遍;

    5. Mix the B component paint well and match the paint according to the weight ratio A: B = 1:1. Brush twice.

    6、用甲组份罩光一遍,增加硬度和光泽度;

    6. Cover with component A once to increase hardness and gloss.

    7、涂漆10—24小时后,人可行走,两至三天后可走汽车,叉车;

    7. After painting for 10-24 hours, people can walk. After two to three days, they can walk by car and forklift.


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】