Epoxy floor paint as a very decorative floor material, not only beautiful appearance, but also very long-term maintenance effect, so it is widely used. In order to make the floor paint work better, its thickness is very important. The suitable thickness is different in different places. Choosing the suitable thickness can not only improve the effect of floor paint, but also reduce the inconvenience of construction. 如果是机械制造企业厂房地面，或者车间产品比较重、需要经受各种车辆（如汽车、叉车、推车等）的碾轧，则地面的承载力要求较高。济南地坪可以选择做一遍底漆、一遍中涂砂浆、一遍中涂腻子和两遍面漆的环氧砂浆地坪，厚度在1.0-3.0mm左右，根据地面承重载重需求，吨左右以上建议做1mm环氧砂浆地坪，2吨左右建议做2mm厚的环氧砂浆地坪。另外，叉车轮子建议换成橡胶轮，减少对地面的划伤损害。
If the floor of a factory building in a mechanical manufacturing enterprise, or the products in the workshop are relatively heavy and need to be rolled by various vehicles (such as automobiles, forklifts, carts, etc.), the bearing capacity of the floor is required to be higher. Jinan floor can choose to make one-time primer, one-time intermediate mortar, one-time intermediate putty and two-time topcoat epoxy mortar floor. The thickness of the epoxy mortar floor is about 1.0-3.0 mm. According to the load-bearing demand of the ground, it is suggested to make 1 mm epoxy mortar floor above one ton and 2 mm thick epoxy mortar floor about two tons. In addition, forklift wheels are suggested to be replaced by rubber wheels to reduce scratch damage to the ground.
If dozens of tons of goods go on the ground, it is recommended to make 3-5mm epoxy mortar floor, and the requirements of the grass-roots floor is very mild, otherwise the epoxy floor paint is made thicker, the grass-roots will be crushed, which will lead to the floor paint delamination. If the office and other people mainly walk on the ground, the concrete floor strength is above C25 and the light is collected, Jinan floor can choose to do a primer, a putty and two times of thin coated epoxy floor, the thickness of which is about 0.5-0.8 mm, which is very economical and practical.
标签:   环氧地坪 地坪 环氧地坪施工 环氧地坪漆