In order to ensure the quality of epoxy flooring and give full play to its superior performance, we should not only strictly select materials, but also carry out construction and maintenance by professional teams. Zhengzhou and Europe, which have passed the certification of ISO 9001 quality management system, are reminded by relevant experts that it is also essential to do a good job in acceptance of epoxy flooring. What details should be grasped in acceptance of epoxy flooring? Experts from epoxy flooring manufacturers summarize as follows:
1. When the ambient temperature is 25 C, the hardness should reach about 80% of the solidification after 2-3 days of construction.
2. No sticking can occur on the surface.
3. Bubbles: flat coating and mortar without bubbles, self-leveling allows one small bubbles per 10 square meters;
4. It has good leveling, no trowel mark and smooth interface in large area.
5. No float, uniform and uniform colors, allowed to have very little obvious color difference at large areas of the interface;
6. There are no coarse impurities, but the dust in the air is allowed to fall on the minimal defects.
7. The surface of the floor should be smooth and smooth, and the glossiness should meet the design requirements (high gloss (> 90), gloss (> 70), half gloss (> 50 ~ 70), and the flat coating type should be glossy and water-based should be half glossy (~dull).
8. The anti-skid surface effect of orange peel and mortar should be obvious.
Zhengou, which integrates R&D, production and construction services of epoxy flooring, will continue to insist on taking new technology, new products and new services as its responsibility and devote itself to bringing more high-quality, green and environment-friendly flooring materials and professional construction services. From material selection to construction maintenance, Zhengzhou and Europe strive to improve casting quality and promote new breakthroughs in the development of China's floor industry.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工