During the construction of epoxy floor paint, what happens to the appearance of poor color and whitening of the floor coating? Today, epoxy flooring manufacturers for you to analyze the causes of this problem and coping strategies. According to the past construction experience in Zhengzhou and Europe, the whitening phenomenon of epoxy floor paint film is a very common phenomenon. It mainly occurs in the process of painting construction or just finished painting, the surface of the film appears milky white, losing light, and serious micro-pore phenomenon. There are two main reasons for this phenomenon: 一是，施工时环境中的水分过多，施工场所空气中湿度太高、或是环氧地坪涂料水分过多，就会导致涂膜发白；
First, excessive moisture in the environment during construction, too high humidity in the air of the construction site, or too much moisture in the floor coating will lead to whitening of the coating.
Secondly, because of the solvent, the boiling point of diluents and organic solvents is low, volatilization is too fast at room temperature, and water vapor condenses on the coating surface, resulting in whitening, glossy, turbidity, cracks and small holes.
This kind of whitening and micro-porous situation, there is no problem slightly, but serious will affect the overall quality of the floor coating system, so in the construction process, we must ensure the corresponding environmental conditions: temperature, humidity, wind, and the use of diluents, solvents, paints and so on to be appropriate, so as to avoid the floor coating film whitening, micro-porous quality problems to the greatest extent. 。
In addition, to effectively prevent the occurrence of whitening phenomenon, we need to prepare complete equipment before construction, such as thermometers, measuring humidity and wind power tools, if not, we need to rely on the mature experience of workers.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工