欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 新闻资讯

    列管式冷凝器部分和使用范围解读

    2018-12-28 14:45:28 无锡盛发地坪科技有限公司 阅读

    冷凝器销售采用端面马蹄形磁力搅拌器,完全静密封、无泄漏,耐高温、高压、高真空、搅拌转速高、运行平稳、噪音小、适用范围广、使用简单、操作方便等特点,是实验室进行各种搅拌反应的理想设备。冷凝器适用于反应物料粘度小的液体、气体等介质在不同的反应条件下进行搅拌反应,不适用于粘度大的、带固体料或产生结晶的介质进行搅拌反应。主要用于气体与液体反应、气体与气体反应、液体与固体反应。搅拌轴承采用耐腐蚀不锈钢或陶瓷球轴承。

    Condenser sales use end horseshoe-shaped magnetic mixer, completely static seal, no leakage, high temperature, high pressure, high vacuum, high mixing speed, smooth operation, low noise, wide range of application, simple use, easy operation and so on. It is the ideal equipment for various mixing reactions in the laboratory. Condenser is suitable for stirring reaction of liquid and gas with low viscosity of reaction material under different reaction conditions. It is not suitable for stirring reaction of medium with high viscosity, solid material or crystallization. Mainly used for gas and liquid reaction, gas and gas reaction, liquid and solid reaction. Stirring bearings are made of corrosion-resistant stainless steel or ceramic ball bearings. 冷凝器销售釜体部分

    Condenser sales kettle body part

    1.釜体部分由圆筒和上、下封头组成,提供物料化学反应的空间,其容积由生产能力和产品的化学反应要求决定。

    1. The kettle body is composed of a cylinder and upper and lower heads, which provides space for chemical reaction of materials. Its volume is determined by production capacity and chemical reaction requirements of products.

    2.中、低压筒体通常采用不锈钢板卷焊,也可采用碳钢或铸钢制造,为防止物料腐蚀,可在碳钢或铸钢内表面衬耐蚀材料。

    2. Medium and low pressure cylinders are usually welded with stainless steel sheets or made of carbon steel or cast steel. In order to prevent material corrosion, corrosion resistant materials can be lined on the inner surface of carbon steel or cast steel.

    3.釜体壳能同时承受内部介质压力和夹套压力,必须分别按内、外压单独作用时的情况考虑,分别计算其强度和稳定性。

    3. The shell of the kettle can withstand both the internal medium pressure and the jacket pressure. The strength and stability of the kettle must be calculated separately according to the condition of the internal and external pressure acting alone.

    4.对于承受较大外压的薄壁筒体,在筒体外表面影设置加强圈。

    4. For the thin-walled cylinder under large external pressure, a stiffening ring is arranged on the outer surface of the cylinder.


    冷凝器销售使用范围

    Sales scope of condenser

    1)不适于PH值大于12且温度高于80°C的碱性介质或物料。

    1) It is not suitable for alkaline media or materials with PH value greater than 12 and temperature higher than 80 degree C.

    2)不适于酸碱物料交替进行的反应过程。

    2) It is not suitable for the alternating reaction of acid-base materials.

    3)冷凝器不适于在温度剧变化时,所产生过大的应力会导致爆瓷而损坏设备,因此在使用过程中应升温或降温,严防聚冷聚热。

    3) Condenser is not suitable for the rapid change of temperature, the excessive stress will lead to the explosion of porcelain and damage the equipment, so in the use process should be heated or cooled, strictly prevent the condensation of cold and heat.

    4)不适于任何浓度和温度的氢氟酸及含有氟离子的介质或物料。

    4) Hydrofluoric acid and media or materials containing fluoride ions which are not suitable for any concentration and temperature.

    5)不适于浓度大于30%,温度大于180°C度磷酸介质或物料。

    5) It is not suitable for phosphoric acid medium or material whose concentration is more than 30% and temperature is more than 180 degrees C.

    辛苦整理!转载请注明来自 http://www.zqshzb.com/n1b/3028.html



    标签:  冷拔钢管 环氧地坪 地坪 环氧地坪漆 冷凝器 环氧地坪施工
    无锡环氧地坪