Why are galvanized gas hot stoves set up in common with many hot stoves? All parts of gas hot stoves, burners, inner walls and exhaust equipment are galvanized. These galvanized equipment have many advantages. The oxygen burner of galvanized gas hot blast stove consists of fuel supply equipment and oxygen distribution equipment. As long as the computer control system of the hot stove is properly used, there are fewer hardware problems.
The furnace body of gas hot blast stove needs to be baked at high temperature to transfer heat. The quality of the furnace body determines the life of the whole hot blast stove. If galvanized inside and outside the furnace body, it can have good corrosion resistance, good tensile strength and good thermal conductivity.
There are many advantages of galvanizing gas hot blast stove body. The galvanized hot blast stove can prolong the service life of the hot blast stove, and zinc oxide can prevent the further oxidation of the hot blast stove inside the hot blast stove. The iron surface inside the hot blast stove will oxidize rapidly when exposed to air, so the galvanized gas hot blast stove will have longer service life. If not galvanized, then iron will produce yellow hot metal after combustion, which will affect the quality of hot blast stove. After galvanizing, the occurrence rate of scale will be reduced in the use process. Therefore, the appearance of galvanized hot blast stove can prolong the service life of hot blast stove to a certain extent, and improve the water quality of hot blast stove.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 热风炉