According to different production methods, it can be divided into hot-rolled pipe, cold-rolled pipe, cold-drawn pipe, extruded pipe and so on. Cold-drawn seamless steel pipes are generally produced on automatic pipe rolling mills. The solid billet is checked and cleared of surface defects, cut into the required length, centered on the end face of the billet perforation, then sent to the heating furnace for heating, and perforated on the perforator. Under the action of the roll and the top, a cavity is gradually formed inside the billet, which is called capillary. It is then sent to the automatic pipe mill to continue rolling. Finally, the wall thickness of the whole machine is equalized, and the sizing machine is used to calibrate the diameter, which meets the requirements of specifications. It is an advanced method to produce hot-rolled seamless steel pipe by continuous pipe rolling mill. 2若欲获得尺寸更小和质量更好的冷拔无缝钢管，必须采用冷轧、冷拔或者两者联合的方法。冷轧通常在二辊式轧机上进行，钢管在变断面圆孔槽和不动的锥形顶头所组成的环形孔型中轧制。冷拔通常在0.5～100T的单链式或双链式冷拔机上进行。
If we want to obtain cold-drawn seamless steel tubes with smaller size and better quality, we must adopt cold-rolling, cold-drawing or combination of the two methods. Cold rolling is usually carried out on a two-roll mill. Steel tubes are rolled in an annular pass consisting of a circular groove with variable cross-section and a fixed conical head. Cold drawing is usually carried out on single-chain or double-chain cold-drawing machines of 0.5-100T.
The extrusion method is to place the heated tube blank in a closed extrusion cylinder, and the perforating rod moves with the extrusion rod to extrude the extruded part from a smaller die hole. This method can produce steel pipes with smaller diameter.
标签:   冷拔钢管 环氧地坪 地坪 环氧地坪漆 环氧地坪施工