Usually, there are two kinds of water shortage in biomass hot stove, one is slight water shortage, the other is serious water shortage. If the water level is below the prescribed lowest level but still visible, or if the water level is not visible and the water level is called "water method", when the water level can be seen, it belongs to slight water shortage. If the water level can not be seen, the "water method" is still called water shortage.
It is believed that many friends do not know much about "calling water". The so-called "calling water" refers to opening the water cock of biomass hot blast stove, closing the steam cock, flushing the water connecting part, then slowly closing the water cock. We should pay attention to whether water enters the water level meter of hot blast stove. This method is called "water method".
Generally, the causes of water shortage in biomass hot blast stove are as follows: water level control is weak; water supply system is malfunctioning; leak caused by improper discharge valve of hot blast stove can cause water shortage in hot blast stove, etc. Therefore, we should find out the causes in time and deal with them correctly so as to prevent accidents.
When water shortage occurs, such as water level is only below normal water level. But we can still see that we should strengthen the water supply and rinse water level gauge to resume normal. If the water level can not be seen after using the "call water method" and the flushing water level meter, it may be that there is a serious water shortage accident, then the furnace should be stopped immediately to find out the reasons.
Today we and you will first introduce here, I believe that through the above content, you also know the reasons for the shortage of water in biomass hot stove and the solutions.
标签:   热风炉 环氧地坪漆 环氧地坪 地坪 环氧地坪施工