The vacuum hot stove is equipped with six safety protection devices to ensure the safe and stable operation of the hot stove. The safety control devices include electrical protection device, physical protection device and destructive protection device. Electrical protection devices: Combustion safety control device II. The heat medium water temperature control device can control the temperature and water level of the heat medium water in the furnace body. The pressure switch, when the pressure in the furnace rises abnormally, does act, so that the combustion will stop automatically. ⑵、物理保护装置：①。温度过热保险丝。在96℃以下确实熔断，使燃烧自动停止。②。低水位温度保险丝。炉体内热媒水位过低，导致温度上升时，防止低水位温度保险丝熔断，燃烧自动停止。⑶、破坏性保护装置：溶解栓，在98℃以下确实溶解，将炉体内成都找人公司蒸汽释放成都收账大气中，使炉体不受到异常收账压力。破坏性保护装置在所有电子安全装置都失灵成都找人公司情况下，保证机组永无爆炸的危险。
2. Physical protection devices. The temperature is overheated. It does fuse below 96 degrees centigrade to stop combustion automatically. 2. Low water temperature fuse. When the temperature rises due to the low water level of the heat medium in the furnace, the fuse of the low water level temperature will be prevented from fusing and the combustion will stop automatically. (3) Destructive protection device: dissolve the plug, it does dissolve below 98 C, release the steam in the atmosphere of the furnace body, so that the furnace body is not subject to abnormal pressure. The destructive protection device ensures that the unit will never be in danger of explosion when all electronic safety devices fail.
标签:   热风炉 环氧地坪 地坪 环氧地坪漆 环氧地坪施工