There are three ways of expressing the output of a hot stove, that is, big card / hour (Kcal/h), ton / hour (t/h) and megawatt (MW). 1. The large card / hour is the way of expression in metric units. It represents the heat supplied by the hot stove every hour. (2), "ton" or "steaming ton" is a popular term borrowed from steam hot-blast stove, which means that the heat supplied by the hot-blast stove per hour is equivalent to the heat absorbed by heating a certain mass of water (usually expressed in tons) from 20 degrees Celsius and vaporizing it into steam. 3. Megawatt (MW) is the unit of power in the international system of units, and the basic unit is W (1MW=106W). This expression should be used in formal documents. The conversion relationship between the three expressions is as follows: 600 thousand kcal / h, 1 steam ton / hour, 0.7MW. 热风炉水质标准
Water quality standard for hot blast stove
This standard specifies the requirements for water quality in the operation of industrial hot blast stove.
This standard is applicable to fixed steam hot stove and steam-water dual-purpose hot stove with water as medium and fixed pressure hot stove with water as medium and atmospheric hot stove with rated outlet steam pressure less than or equal to 2.5 MPa.
标签:   热风炉 环氧地坪 地坪 环氧地坪漆 环氧地坪施工