热风炉不同于普通成都收账实验电炉,其在结构以及使用上都具备特殊性,为了更好成都找人公司保证安全使用,也使其尽可能成都收账发挥果效,有以下收账操作注意：1. 热风炉炉芯位置确定要准确,反应箱必须垂直吊放,高度适中,放置端正,两排箱体之间保持等距,定保炉芯宽度尺寸精确无误.反应箱四角与端墙缝隙处,用纸填实.Hot-blast stove is different from ordinary experimental electric stove. It has special structure and use. In order to ensure its safe use and make it as effective as possible, the following operation should be noted:
1. The position of the hot blast stove core should be determined accurately. The reaction box must be placed vertically, with a moderate height, and placed correctly. The width of the hearth should be kept equidistant between the two rows of boxes. The gap between the corner of the reaction box and the end wall should be filled with paper.
2. Check the track of the hot blast stove before starting. The wire rope, hoist, bracket and trolley must be intact and lubricated according to the regulations.
3. Drivers must obey the instructions of furnace loading operators and cooperate closely. Lack of material at the bottom of the furnace should be placed, three points should be inserted with a steel ruler (both ends and the middle), inspected according to the prescribed size, and the material at the four corners of the furnace should be fully stepped on to prevent wall burning by flowing salt.
4. The hopper closer should be closed tightly after each charge is put in. After the charge is filled, the waste material or graphite sprinkled on the end wall tie rod should be cleaned up. The winch trolley should be parked in a safe position, the top axle should be pressed up, and the top axle should be covered properly. The furnace number and the abnormal condition of the furnace should be filled into the process card and transmitted to the trolley with the furnace.
5. When hoisting the reaction box, the crane should be directed to put it in the right position and lift it vertically. The hot blast stove truck can only be hoisted until the box is fully removed. It is strictly forbidden to hoist the reaction box during operation. When placing the reaction box, the reaction box should be placed in sequence. The loader should place the four-chain hook removed in the box so as not to hang the outer edge of the box to make the box move when hoisting the hook. Bruise the operator with a set or a box.
标签:   环氧地坪 热风炉 环氧地坪漆 地坪 环氧地坪施工