1. The function of the scissors brace of the mobile scaffold is mainly to prevent the longitudinal deformation of the mobile scaffold, so as to improve the overall stiffness of the scaffold. 2. link between mobile scaffolding and unloading platform? It is better to design the unloading platform individually for easy management. 3. Steel pipes can be installed in mobile scaffolds with serious corrosion, flattening, bending ladder scaffolding and cracked pipes.
4. Where cracks, deformations and contractions occur in mobile scaffolding, fasteners are not allowed to be used and sliding lines are not allowed.
5. the indication of the lifting platform is mainly in the case of tip card scaffolding load.
6. no mobile scaffolding should be more than 45 meters at the height of construction.
7. Mixed use of steel and bamboo mobile scaffolding is not allowed, because mobile scaffolding as a supporting object, the overall requirement is the overall strength, unshakable, non-deformable, stable, if mixed use, there are no joints that can be shared, can not ensure its stability.
8. when you build mobile scaffolding, you should wear safety helmet, seat belt, and antiskid shoes.
9. When you use mobile scaffolding, you must not remove the following rods to ensure safety: vertical horizontal rod, vertical and horizontal sweep rod, wall debris in the main node.
10. Regarding the basic conditions of mobile scaffolding installation personnel, scaffolding installation personnel must pass the examination professionally and be subject to the National Standard "Safety and Technical Assessment Management Rules for Special Combatants". Only in this way can we protect the life and safety of life.
标签:   环氧地坪 脚手架 环氧地坪漆 地坪 环氧地坪施工 环氧地坪翻新