The same epoxy flooring will show different effects in different situations, sometimes the relative life is half different. Why? What should we pay attention to in the use process to make its life longer? Epoxy flooring company will explain to you: when cross-construction, the construction environment of epoxy flooring should have enough isolation zone. In order to avoid infiltration of dust and sand into the dry paint film. 环氧地坪容易受到污染的区域，比较显眼的门口、走廊应每天用宽布拖把清洁1-2次。
In areas where epoxy floors are susceptible to contamination, prominent doors and corridors should be cleaned 1-2 times a day with wide cloth mops.
If there are coarse and hard sand grains and mud on the ground, it should be cleaned in time to avoid grinding and reduce ground wear.
Employees should change their soft soles before entering the epoxy floor clean area. Plastic blankets should be installed at the junction where sand and mud are easily brought in and at the entrance and exit so as to facilitate the removal of sole debris when employees enter and exit.
When the forklift truck is unloaded, the goods should be placed horizontally, so as to avoid the lateral nephew, drag and scrape the epoxy floor.
Vehicles, forklifts and forklifts should be avoided as far as possible. Where oil is often leaked, sawdust can be used to clean it, so as to avoid oil denaturation, dust adsorption and become a stubborn stain. When the area of the oil immersion area is relatively large, we can use the wide cloth mop to drive the sawdust to drain the floor oil.
Pay attention to the above points when using, the life of epoxy floor will be longer. Some special epoxy floor can also be used for reference.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧地坪翻新