The worn-out epoxy floors refer to the epoxy mortar floors, epoxy resin floors, epoxy self-leveling floors, epoxy anti-static floors, epoxy anti-corrosion floors, epoxy anti-skid floors, epoxy coloured sand terrazzo floors and so on. After 2-3 years of use, these floors will appear peeling, delamination, breakage or even whole piece falling off. How to deal with it? Then use epoxy floor paint to repair, it is only temporary, cost-saving approach is to use cement ground hardener to carry out ground renovation. 环氧树脂地坪漆本身无毒，但环氧树脂地坪漆固化剂有毒，如MDA、TDl是致癌物质，这些致癌物质会残留在环氧树脂地坪内，慢慢挥发出来。这就是美国人不做环氧树脂环氧地坪的根本原因，因为美国人知道环氧树脂环氧地坪固化剂致癌，会残留在环氧树脂地坪内。所以环氧树脂地坪漆也不适合做家装。
Epoxy floor paint itself is non-toxic, but the curing agent of epoxy floor paint is toxic, such as MDA, TDl are carcinogens, these carcinogens will remain in the epoxy floor, and gradually volatilize. This is the fundamental reason why Americans do not make epoxy floors, because Americans know that epoxy flooring curing agents cause cancer and will remain in the epoxy flooring. Therefore, epoxy floor paint is not suitable for home decoration.
Now can not do epoxy floor resin floor, and now popular floor. Polished concrete diamond grinding stone, consisting of cement mortar, armor and wire, is cast in one place, seamless as a whole, low-carbon, energy-saving and environmental protection, wear-resistant, waterproof, skid-proof, smooth and durable.
Foundation treatment 1, grinding machine for comprehensive grinding. Let the damaged, sand-lifting, weak viscosity, cracking, empty drum parts completely exposed; and the floating mortar, old epoxy cement caking and other grinding flat. Customers who need it please call! I will inform you of the details of the construction ground. I will give you a quotation according to your ground conditions.
2. Grounds with looseness, cracks or delamination must be thoroughly polished to a compact base to ensure the cohesion of the ground.
3, clean up the surface ash, pollutants and other rubbish to ensure the cleanliness of the surface.
4, clean the ground.
Inspection method: After treatment, the epoxy floor surface is smooth, compact, dry, no oil pollution, and no loose and fragile particles, before the next process of construction can be carried out.
Special treatment for expansion joints, cracks, hollowing floors and loose old epoxy
1. Cutting slices into V-shaped grooves are used to repair and fill the cracks. Fine cracks can be repaired with epoxy resin and Extender T thickener. Fine cracks can be smoothed by hand grinder after solidification.
2. Cut hollow drum and loose parts of old epoxy, such as deep concave, use high-power medium-coated mortar to flatten them, and then grind them fine to flat after solidification.
3. All special sites should be cleaned once again after repair.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧地坪翻新